Regulations 1992 No.71 of 1992 Work Health (Occupational Health and Safety) Regulations
Tabled Paper 1310
Tabled Papers for 6th Assembly 1990 - 1994; Tabled Papers; ParliamentNT
Made available by the Legislative Assembly of the Northern Territory under Standing Order 240. Where copyright subsists with a third party it remains with the original owner and permission may be required to reuse the material.
Work Health (Occupational Health and Safety) Regulations Column 1 Column 2 Type of Work Type of Licence Operation of a turbine with any or all of the following features Turbine Operation (a) attached condensers; (b) multi-wheeled; (c) a multi-staged heat extraction process; (d) a speed greater than 3600 rpm Operation of all expanding (steam) reciprocating engines with any piston diameter greater than 250mm Reciprocating Steam Engine Operation Crane and Hoist Ooeration Operation and additionally, in the case of a crane referred to in paragraphs (a), (f), (9)/ (h), (j) and (k), the setting up and dismantling of a (a) tower crane - Tower Crane Operation (b) derrick crane - Derrick Crane Operation (c) portal boom crane Portal Boom Crane Operation (d) bridge or gantry crane (cabin and remote over 3 operations) Bridge and Gantry Crane Operation (e) vehicle loading crane (capacity 10 tonne metres and above) Vehicle Loading Crane Operation (f) non-slewing mobile crane (capacity 3 tonne and above) Non-slewing Mobile Crane Operation (g) slewing mobile crane (up to 20 tonnes) Slewing Mobile Crane Operation (up to 20 tonne) (h) slewing mobile crane (up to 60 tonnes) Slewing Mobile Crane Operation (up to 60 tonne) 75