Sediment Quality Sampling Design for Darwin Harbour
Brinkman, Richard; Logan, Murray; Northern Territory. Department of Environment and Natural Resources; Australian Institute of Marine Science
E-Publications; E-Books; PublicationNT; Report Number 44/2019
2020-01-06
Darwin Harbour
In the context of increasing development and associated pressures, this project aims to inform the development of a first systematic, long-term, sediment monitoring program for Darwin Harbour which takes into consideration the physicochemical nature of Darwin Harbour sediment and the oceanographic processes which will influence the movement of contaminated sediment in the Harbour. The rationale for the program is that seabed and estuarine sediments are both an extensive habitat and the ultimate repository for many contaminants that enter waterways. In addition, monitoring of contaminants in sediment may facilitate the identification of increasing contaminant loads in the Harbour which may not be detected by water monitoring programs due to the high flushing rate within Darwin Harbour and infrequent water sample collection.
Made available by via Publications (Legal Deposit) Act 2004 (NT).
1. Executive summary -- 2. Introduction -- 3. Methods -- 3.1 Overview of methodology -- 3.2 Tidal Hydrodynamics -- 3.3 Wave Dynamics -- 3.4 Sediment Modelling -- 3.5 Sediment sampling design analysis -- 4. Results -- 4.1 Tidal and wave driven hydrodynamic processes -- 4.2 Sediment transport modelling -- 4.3 Sediment characteristics from previous sampling programs -- 4.4 Sediment sampling design analysis -- 4.4.1 Existing chemical sediment data, Outer Harbour sediment monitoring data, and designated sampling sites -- 4.4.2 Hydrodynamic modelling layers -- 4.4.3 Exclusion zone masks -- 4.5 Spatial Model fitting -- 4.5.1 Background on statistical techniques for designing sediment sampling program -- 4.5.2 Results from statistically derived sampling design - East Arm -- 4.5.3 Results from statistically derived sampling design - Outer Harbour -- 4.5.4 Representation of sampling sites mapped with hydrodynamic and sediment modelling parameters -- 4.6 Harbour Sediment Zonation, and conceptual representation: -- 5 Conclusions -- 6 References -- 7 Appendix 1
English
Sediment quality; Tidal hydrodynamics; sediment sampling; design analysis
Northern Territory Government
Palmerston
Report Number 44/2019
43, 74 pages : colour maps ; 30 cm
application/pdf
9781743502303
Attribution International 4.0 (CC BY 4.0)
Northern Territory Government
https://creativecommons.org/licenses/by/4.0/
https://hdl.handle.net/10070/755961
https://hdl.handle.net/10070/765802
-56 Figure 52: Integrated Nested Laplace Approximation (INLA) barrier spatial modelling of Selenium. The diagram illustrates a) the mesh, b) the barrier mask, c) the resulting predicted 2D surface (and observed training data as points) and d) the resulting predicted 2D surface scaled to the range of predictions.
Aboriginal and Torres Strait Islander people are advised that this website may contain the names, voices and images of people who have died, as well as other culturally sensitive content. Please be aware that some collection items may use outdated phrases or words which reflect the attitude of the creator at the time, and are now considered offensive.
We use temporary cookies on this site to provide functionality. |
You are welcome to provide further information or feedback about this item by emailing TerritoryStories@nt.gov.au